extension cable type, connector type, exposed terminal type, extension cable (with connector) type ?00 to +500?c single-core, 3-wire system 5 times the sheath outside diameter, not bent up to 100mm from tip see next page. ?applied standard: ?resistance element: ?protective tube material: ?sheath outside diameter: ?mounting method: ?insertion length: jis c 1604 -1997 nominal resistance; pt100 class; a, b rated current; 2ma allowable error due to temperature; note:1) "t" is measured temperature ex- pressed in (?c) independent of +/ symbols. 2) allowable error is the maximum limit of resistance value of resis- tance thermometer bulb obtained by subtracting measured tempera- ture from the temperature calcu- lated according to the reference resistance table. sus316 4.8mm or 6.4mm insertion type or screw-in type (with mounting fitting) mounting fitting screw size; r 1 / 8 (pt 1 / 8 ) or r 1 / 4 (pt 1 / 4 ) 100 to 9000mm(specified in the unit of 10mm) ?terminal structure: ?operating temperature range: ?element structure: ?minimum bending radius: ?response characteristic: this resistance thermometer bulb is firmly sealed with high- purity oxidized magnesium (insulating material) in a fine me- tallic protective tube. unlike ordinary resistance thermom- eter bulbs, it provides excellent sensitivity and vibration re- sistance, and is designed to permit easy bending work. specifications features data sheet fth sheath type platinum resistance thermometer bulb 1. resistance thermometer bulb is very small in size, provid- ing excellent sensitivity. 2. adoption of integrated structure has improved the vibra- tion resisting characteristic. 3. easy bending work allows fabricating a long-sized resis- tance thermometer bulb for easy measurement even in a place where ordinary type resistance thermometer bulb cannot be used. 4. various types of terminals such as extension cable type, connector type, exposed type, terminal box type, etc., are also available for selection according to applications. 5. measurement range covers ?00 to +500?c. code symbols (0.15+0.002t) ? c (0.3+0.005t) ? c class a b allowable error - 5 h t fw description insertion length enter insertion length in cm unit (minimum length; 10cm, maximum length; 900cm). example: 055 / 55cm element single-core, 3-wire system (jpt100. class b) single-core, 3-wire system (jpt100, class a) sheath outside diameter 4.8mm 6.4mm 1 7 3 4 cable length none (12th code d, g, p) with 1m cable with 3m cable (12th code l, q) 0 1 3 sheath material sus316 w mounting method insertion type with mounting fitting r 1 / 8 (pt 1 / 8 ) with mounting fitting r 1 / 4 (pt 1 / 4 ) 0 1 2 0 9 1 0 0 0 terminal structure extension cable type exposed terminal type terminal box type connector type extension cable(with connector)type l d g p q date EDS2-24A jun. 14, 2002
100 90 80 70 60 63.2 temperature (?c) 50 40 30 20 10 0 01 t=15sec t=8sec t=1min10sec time lapse (min) note: "t" :time constant 23 ordinary type, 12 sus304 protective tube 6.4 sheath type 4.8 sheath type 74 ?.5 g3/8 (pf3/8) fth w 5 g0 (82) ?.8 or ?.4 (as specified) l (as specified) 0 1 2 3 4 1 7 55 fth w 5 d0 50 ?.8 or ?.4 (as specified) l (as specified) mounting fitting shown at lower left is supplied as specified. mounting fitting shown at lower left is supplied as specified. 0 1 2 3 4 1 7 70 fth w 5 p0 ?7 ? ?.8 or ?.4 (as specified) l (as specified) connector 0 1 2 3 4 1 7 70 l (as specified) 40 fth w 5 q ?7 ? ?.8 or ?.4 (as specified) h (as specified) connector cabtyre cable 0 1 2 3 4 1 7 1 3 fth w 5 l 0 1 2 3 4 1 7 1 3 40 ?.5 1000 l (as specified) pvc cabtyre cable r1/8 (pt1/8) or r1/4 (pt1/4) ?.8 or ?.4 (as specified) ?0 ?.3 hole ?0 ?.5 resistance thermometer bulb time-lag largely varies with measurement conditions. the above shows an example of measurement in 100 c warm water with sheath type resistance thermometer bulb and ordinary type resistance thermometer bulb. fth outline diagram (unit: mm): < resistance bulb time-lag > mounting fitting (supplied as specified) information in this catalog is subject to change without notice. printed in japan head office gate city ohsaki, east tower, 11-2, osaki 1-chome, shinagawa-ku, tokyo 141-0032, japan http://www.fesys.co.jp/eng instrumentation div. international sales dept. no.1, fuji-machi, hino-city, tokyo, 191-8502 japan phone: 81-42-585-6201, 6202 fax: 81-42-585-6187 http://www.fic-net.jp/eng caution on safety *before using this product, be sure to read its instruction manual in advance.
|
